Peter Korsgaard wrote: > David> But I still can not get host 1B working. Any sugestions as to > David> something I can look at ? > > Not right away. All the platforms I have been using have only used > port 1A, so there could potentially be a mistake in the driver / > firmware. Thanks, even knowing that helps. I have spent most of this morning soldering a wirewraped USB connector to my board. If the interrupt firware was wrong, maybe somebody switched D+ and D- or maybe I can connect to 2a and use it as a 2nd host. Unfortunately no joy. As best as I can tell the USB system is finding 1A,1B, amd 2A - ls /dev/usbdev* lists usbdev1.1 usbdev1.1_ep00 usbdev1.1_ep81 usbdev1.2 usbdev1.2_ep00 usbdev1.2_ep01 usbdev1.2_ep81 usbdev2.1 usbdev2.1_ep00 usbdev2.1_ep81
How about anybody used 2A or 2B ? Anybody know of a Xilinx/Cypres test app that tests hosts on anything but 1A ? -- Dave Lynch DLA Systems Software Development: Embedded Linux 717.627.3770 dh...@dlasys.net http://www.dlasys.net fax: 1.253.369.9244 Cell: 1.717.587.7774 Over 25 years' experience in platforms, languages, and technologies too numerous to list. "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." Albert Einstein _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded