Scott Wood <scottwood <at> freescale.com> writes: > cuboot-824x is for 8240, 8245, and similar chips. You want cuboot-pq2.
Hi Scott et al, I seem to get further with the cuboot-824x file- with the cuboot-pq2 file the boot sequence doesn't even reach the 'zImage starting' stage. The machine reboots just before it should be printing out 'zImage starting'. Is there a way I can get more detailed debug to see what's happening? Do settings from bd_info struct override the settings from the DTS file? Also, a lot of the settings passed from u-boot in our 2.6.14 environment are plain wrong eg. wrong memory, wrong processor speed. In this case, the correct settings are set elsewhere (for memory, it is a kernel parameter ie. mem=32M, and the processor speed is set in the 2.6.14 'make menuconfig'). Therefore, the machine still boots into Linux correctly. For 2.6.27, would these incorrect settings be causing my problems? Daniel _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
