Jacob, I tried this program out, and ...
On Thu, Jul 10, 2014 at 03:49:30PM -0700, Jacob Keller wrote: > +.BI caps > +Display the device capabiltiies. This is the default command if no commands > are > +provided. With no command, nothing is displayed. > +Quickly sanity check frequency slewing by setting slewing frequency by > positive > +10%, resetting clock to 0.0 time, waiting for 10 seconds, and then reading > +time. The time read back should be (roughly) 11 seconds, since the clock was > +slewed 10% faster. > +.RS > +\f(CWphc_ctl /dev/ptp0 freq 10000000 set 0.0 wait 10.0 get This is only 1 % not 10 %. Thanks, Richard ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Linuxptp-devel mailing list Linuxptp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
