On Fri, 2014-07-18 at 19:23 +0200, Richard Cochran wrote: > Jacob, > > I tried this program out, and ... > > On Thu, Jul 10, 2014 at 03:49:30PM -0700, Jacob Keller wrote: > > +.BI caps > > +Display the device capabiltiies. This is the default command if no > > commands are > > +provided. > > With no command, nothing is displayed. >
Oops! > > +Quickly sanity check frequency slewing by setting slewing frequency by > > positive > > +10%, resetting clock to 0.0 time, waiting for 10 seconds, and then reading > > +time. The time read back should be (roughly) 11 seconds, since the clock > > was > > +slewed 10% faster. > > +.RS > > +\f(CWphc_ctl /dev/ptp0 freq 10000000 set 0.0 wait 10.0 get > > This is only 1 % not 10 %. > Yep missed a zero :) I'll get these fixed. Thanks, Jake > > Thanks, > Richard ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Linuxptp-devel mailing list Linuxptp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
