One last question regarding that.
When ptp4l and phc2sys(auto mode) are used on the host, the UTC-TAI
offset used with whatever the default is.
But when inside the KVMs , using phc2sys with ptp_kvm, i have to specify
the offset manually. So should the offset there be "0" since the hosts
system clock has already account for it or should it be the same value
set at host level ?
--
cheers,
Hussam
(Hussamuddin Nasir)
Netlab & GENI Operations Team
-------------------------------------------------------------------
Laboratory for Adv. Networking Phone : (859)218-0059
James F Hardymon Building Fax : (859)323-3740
301 Rose Street, Rm 237 E-mail : na...@netlab.uky.edu
Lexington, KY 40506-0495 Web : http://www.netlab.uky.edu
University of Kentucky
**********************
-------------------------------------------------------------------
On 11/12/20 10:20 PM, Richard Cochran wrote:
On Thu, Nov 12, 2020 at 09:49:38PM -0500, Hussamuddin Nasir via Linuxptp-devel
wrote:
The logs suggested that the delay path was off by +/- 4ns which was
acceptable for us.
Richard: Does this sound like a workable solution.. ?
Yes, your use case is the reason why ptp_kvm was created in the first
place. I haven't used it myself, but it sounds like you are using it
to good effect!
Thanks,
Richard
_______________________________________________
Linuxptp-devel mailing list
Linuxptp-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
