Hallo Richard,
Thank you for your answer ... As a matter of fact, when my colleague has
ask me that i also said that it does not make sens :-) and we would need
separate port and PHC :-) ..
I clear is our situation :
the purpose will be used on embedded software on train .
the train has two railway engine, one on the front and the other on the
back. these two engines run a ptpd daemon as a master. both engine
communicate independently with an I/O board controller which would run a
ptpd daemon as a slave.
so my idea is to have two ptpd daemon as slave on the I/O board
controller . One of the slave daemon will communicate with the front master
and the other will communicate with the other master at back of the train.
I read about configuring domain. How could I use this idea.
Once again thank you for all,
Baya
2016-07-12 20:39 GMT+02:00 Richard Cochran <richardcoch...@gmail.com>:
> Well it is possible, provided that each ptp4l instance has its own
> port, and that each port has its own PHC.
>
> But to be quite honest, your proposed use case does not make any
> sense. What are you trying to acheive?
>
> Thanks,
> Richard
>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Linuxptp-users mailing list
Linuxptp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-users
