On Tue, Jul 12, 2016 at 11:35:18PM +0200, Richard Cochran wrote: > - Another idea is to run Layer-2 and isolate using VLANs.
Also: - You can try running UDP over two different VLAN interfaces. - VLAN will only work if your HW correctly identifies PTP frames with a VLAN header. - Regarding the HW: Some MAC HW can only time stamp one transmit frame at a time, like the Intel 82574 (driver e1000e) for example. If you have such HW, then running two ptp4l instances will *not* work. HTH, Richard ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
