On Fri, Jun 08, 2018 at 07:17:15AM +0000, Jord Pool wrote: > I have a grandmaster server which in synchronising the system clock to the > hardware clock perfectly with sub 100 nanoseconds offset. > > Next, I have another server (in a direct connection) configured to run as the > client. However, when starting this client server, the offset is very high > and after a little while it jumps the clock to 70.000 + seconds offset. The > pattern (as seen in the output below) right after LISTENING to UNCALIBRATED > on RS_SLAVE is however the exactly the same every time: going from 69.. to > 22.. to 44.. to 66.. etc etc.. with the output always ending up in a clock > jump setting it to a 70.000+ second offset.. Anyone here who knows what I am > doing wrong? I have stopped the chronyd as well as NTP services..
Please tell us: - what HW you are using - the ptp4l and phc2sys command lines Thanks, Richard ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
