Hope you have set the correct mode of transport. Did you see the captures? Are you receiving the packets from master? Did you enable verbose log and found any suspicious activity?
Thanks. On Wed, Feb 13, 2019 at 12:35 PM Karthikeyan K <karthikeyan...@aricent.com> wrote: > > Hi Richard, > > We had tried that as well, I guess when the log where taken it wasn't > configured. > Do we need to look at other configuration items? > > Regards, > Karthikeyan. > > -----Original Message----- > From: Richard Cochran <richardcoch...@gmail.com> > Sent: Wednesday, February 13, 2019 2:35 AM > To: Karthikeyan K <karthikeyan...@aricent.com> > Cc: linuxptp-users@lists.sourceforge.net > Subject: Re: [Linuxptp-users] REG : Linux PTP Tests with IPv6 interfaces > > ** This mail has been sent from an external source ** > > > On Tue, Feb 12, 2019 at 03:42:51PM +0000, Karthikeyan K wrote: > > [root@localhost P2P]# ifconfig em2 > > em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > inet 4.0.0.2 netmask 255.0.0.0 broadcast 4.255.255.255 > > inet6 fe80::ec4:7aff:fec5:361f prefixlen 64 scopeid > > 0x20<link> > > This is a link local address. You need to configure a real IPv6 address. > > Thanks, > Richard > ===================================================== > Please refer to http://www.aricent.com/email-disclaimer > for important disclosures regarding this electronic communication. > ===================================================== > > > _______________________________________________ > Linuxptp-users mailing list > Linuxptp-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linuxptp-users -- Thanks Raghu SAVE TREES..GO GREEN _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
