That method doesn't work for me. I have FC5 and the installer set up
pci-assign-busses automatically. I still can't get PC Cards working.
I've been trying both a modem and a CF card reader. Neither work:
CF card reader:
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
Probing IDE interface ide2...
ide-cs: ide_register() at 0x3100 & 0x310e, irq 3 failed
Modem:
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
...then nothing.
Khiraly wrote:
Please look at the archive:
http://lists.pcxperience.com/pipermail/linuxr3000/2006-March/007507.html
Khiraly
Wiki at http://prinsig.se/weekee/
--
Greg Gulik http://www.gulik.org/greg/
greg @ gulik.org
_______________________________________________
LinuxR3000 mailing list
[email protected]
http://lists.pcxperience.com/cgi-bin/mailman/listinfo/linuxr3000
Wiki at http://prinsig.se/weekee/
