I have the latest repository code installed. I am now looking to optimize my install.
I have a lscp file that I load to create 8 Channels all set to ALL and sets Channel Routs to 1,0 2,3 3,4 and so on. I then have an Ardour2 template that creates corresponding tracks and auto maps those tracks to the linuxsampler channels. This all works great! I can load instruments into all of the Channels and in ardour mute and unmute to record the single instruments or run multiple instruments at the same time all recording to seperate tracks. The problem is as follows: - It eats 2 GB of RAM. I only have 2GB of RAM. - I cannot separate the channels like channel 1, channel 2. I have to run all instruments on channel 1 and route the audio ins. Ardour will only see channel 1. Is there anything that you guys could help me with that will make this process more efficient? If I have to get more RAM will 4GB total do? I can compile options if need be, would that help? Thanks for the help! Chris Cherrett ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Linuxsampler-devel mailing list Linuxsampler-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel
