The sampler channel's audio channel routing is an internal routing,
which specifies where the audio rendered by the sampler channel will
go. Currently, the gig engine has two audio channels (in the left
column labeled "Audio Out" in the Channel Routing dialog). The numbers
in the right column ("Audio In") are the channels of the audio device
to which the sampler channel is connected. In the right column you
specify where the signal from every sampler channel's audio channel
should go.
Lets say a sampler channel is connected to audio device with 5 audio
channels and you want to route:
* the first sampler channel's audio channel (which has index 0) to
the third channel of the audio device to which the sampler channel is
connected (which has index 2)
* the second sampler channel's audio channel (which has index 1) to
the fifth channel of the audio device to which the sampler channel is
connected (which has index 4)
then the channel routing should look like:
0 2
1 4
If I understand correctly you want me to rename the labels "Audio Out"
to "Audio In" and "Audio In" to "Audio Out"?
Is there someone against this change?
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Linuxsampler-devel mailing list
Linuxsampler-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel
