On Sat, Jan 21, 2012 at 11:14:37PM +0700, Alexey Osipov wrote: > Okay, I think I see the problem. > > You have a touchscreen device, not a touchpad, right? > > Touchscreen and touchpad behaviours are different in xf86-input-wacom. > > This difference determined by 'WCM_LCD' flag set on device in > wcmDeviceTypeKeys() from wcmValidateDevice.c. > > Then, in wcmSingleFingerPress() from wcmTouchFilter.c this flag is being > checked: > - if it's ON, we make left button press when finger touches the screen > and button release when finger outs. This seems to be your case. > - if it's OFF, we just move the cursor. This seems to be my case. It > seems that tap clicking and tap-and-drag works in this case only. > > So, if you are hacking sources anyway, you may try to remove WCM_LCD > flag from your device and see if it helps.
It should not even be set. the tablet_id is 0xA001 for the egalax, nothing in that sourcefile sets WCM_LCD then. Any idea why it's LCD anyway? I'll try to hack in an xinput setting to allow setting WCM_LCD on the fly. I already tried looking at xsetwacom.c but I could not make no heads nor tail of that. There was no enum, whatsoever, identifying the settings. Only strings. Bizarre. > > Alexey. > > В Сбт, 21/01/2012 в 16:39 +0100, Cedric Sodhi пишет: > > Alexey, here is some info, as I said with current master: > > > > $ xsetwacom list > > Wacom ISDv4 90 Pen stylus id: 12 type: STYLUS > > Wacom ISDv4 90 Pen eraser id: 16 type: ERASER > > eGalax_eMPIA Technology Inc. PCAP MultiTouch Controller touch id: 13 > > type: TOUCH > > > > $ xsetwacom --get 13 all > > Option "Area" "0 0 32767 32767" > > 'Button' requires exactly 1 value(s). > > Option "ToolDebugLevel" "0" > > Option "TabletDebugLevel" "0" > > Option "Suppress" "2" > > Option "RawSample" "4" > > Option "PressureCurve" "0 0 100 100" > > Option "Mode" "Absolute" > > Property 'Wacom Hover Click' does not exist on device. > > Option "Touch" "on" > > Option "Gesture" "off" > > Option "ZoomDistance" "1439" > > Option "ScrollDistance" "639" > > Option "TapTime" "250" > > Property 'Wacom Proximity Threshold' does not exist on device. > > Option "Rotate" "none" > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Wheel Buttons' does not exist on device. > > Property 'Wacom Strip Buttons' does not exist on device. > > Property 'Wacom Strip Buttons' does not exist on device. > > Property 'Wacom Strip Buttons' does not exist on device. > > Property 'Wacom Strip Buttons' does not exist on device. > > Option "Threshold" "0" > > Option "ToolID" "295" > > Option "ToolSerial" "0" > > Option "ToolSerialPrevious" "1" > > Option "BindToSerial" "0" > > Option "TabletID" "40961" > > > > I also tried with Gesture "on", that didn't make a difference though. > > Why should it. That behaviour we are talking about really has nothing at > > all to do with gestures. > > > > What do you mean you have never seen such behaviour even before your > > patches?! What I described is the normal behaviour! What did you > > understand? > > > > Cedric > > > > On Sat, Jan 21, 2012 at 10:32:24PM +0700, Alexey Osipov wrote: > > > It's strange. > > > > > > I've never seen such behaviour as you describe on xf86-input-wacom nor > > > after my patches neither before. > > > > > > Did you enable Gestures on Touch device with xsetwacom? > > > > > > В Сбт, 21/01/2012 в 16:25 +0100, Cedric Sodhi пишет: > > > > I just cloned xf86-input-wacom and compiled and I notice no difference > > > > other than my local patch (which give pens a global precedence over ANY > > > > touch, which I need because my touch-device is not the same as the pen > > > > device) rendering it unusuable. > > > > > > > > Without that patch, the mouse pointer still drags when I physically > > > > drag. > > > > > > > > > > > > On Sat, Jan 21, 2012 at 09:16:42AM -0600, Favux ... wrote: > > > > > Hi Alexey, > > > > > > > > > > I think Cedric is primarily concerned with touch. > > > > > > > > > > I'm actually soliciting input on the gesture instructions. They're > > > > > also on a linuxwacom-discuss thread where Chris speculated things had > > > > > settled down enough for gestures (with your patches included) that it > > > > > was time to add them to man wacom. > > > > > > > > > > So if you or Cedric or anyone else has comments or changes to suggest > > > > > please let me know. Trying to get the gesture instructions as clear > > > > > and succinct as possible. > > > > > > > > > > Favux > > > > ------------------------------------------------------------------------------ Try before you buy = See our experts in action! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-dev2 _______________________________________________ Linuxwacom-devel mailing list Linuxwacom-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
