On Sun, Sep 25, 2011 at 1:58 AM, Chris Brennan <xa...@xaerolimit.net> wrote:
As far as I know, it is bridged. I was looking around today but I > couldn't find any kind of bridging interface in the pfsense GUI. I'm > not home right now, but will be shortly, then to bed. I will paste my > bridged interfaces from the cmdln and get it to the list. Maybe this > is the problem. As promised, here are my wireless and bridge interfaces. I do noticed that bridge1 has ath0_wlan0 and not vr0 (lan)/vr1 (wan). If one of these are supposed to belong, how would I go about adding the interface? ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 90:a4:de:2f:1d:bb media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> status: running ath0_wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 90:a4:de:2f:1d:bb inet6 fe80::92a4:deff:fe2f:1dbb%ath0_wlan0 prefixlen 64 scopeid 0x9 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> status: running ssid "The Realm" channel 11 (2462 MHz 11g) bssid 90:a4:de:2f:1d:bb country US ecm authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 2 AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 22 scanvalid 60 protmode OFF burst -apbridge dtimperiod 1 -dfs bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether e2:95:71:3f:b8:64 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: vr0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 200000 member: vr2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 3 priority 128 path cost 55 bridge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 46:78:95:6a:ac:99 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: ath0_wlan0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 9 priority 128 path cost 370370 > -- > Chris Brennan > A: Yes. > >Q: Are you sure? > >>A: Because it reverses the logical flow of conversation. > >>>Q: Why is top posting frowned upon? > http://xkcd.com/84/ | http://xkcd.com/149/ | http://xkcd.com/549/ > GPG: D5B20C0C (6741 8EE4 6C7D 11FB 8DA8 9E4A EECD 9A84 D5B2 0C0C) ------------------------------------------------------------------------
_______________________________________________ List mailing list List@lists.pfsense.org http://lists.pfsense.org/mailman/listinfo/list