On 25/10/2011 15:17, Kurt Buff wrote:
AFAIK, the H200 (and I believe any of the H* series including the
H300) is Windows-only.
I ended returning the one we had when I tried to install ESXi on it.
If you find differently, I'd sure like to know.
Kurt
On Tue, Oct 25, 2011 at 04:49, Korves, Tim<[email protected]> wrote:
Hi there,
we recently got a new server for use as our pfsense firewall. We've
chosen a Dell R310 with a PERC H200 "Raid-Controller" as Dell stated,
this one would work under FreeBSD 8. As of now, I'm trying to install
pfSense 2 amd64 from the normal ISO. I can boot up until the console
menu. After selecting "Install on Harddrive", the ncurses installers
starts, asks me for Console-layout etc. Another click on Continue
leads me to a blue screen with a grey bar on top. Nothing more,
nothing less. The system is stuck, even the NumLock Key won't change
it's LED. :-/ Any idea?
Regards, Tim
I encountered a similar experience with R310 series recently. It did not
like FB8 or similar distros (PCBSD, pfSense, etc.). I tried both i386
(pointless, since the system has more than 8GB RAM and I intended to use
64 bit kernel anyway) and amd64, none worked -- the system would freeze,
or in the worst case would not find any drive on the system. I could see
the drives with other OS, and the server came with a disc that had
supported pre-loader for virtually all other possible choices but any of
the BSDs. I ended up loading a few kernel modules (the ones coming to my
mind are smbus, ichsmb, several other scsi controller but not entirely
certain about them) until it worked. you might try that and let us know
if it worked in your case.
all the best.
-------------------------------------------------
This message sent via VFEmail.net
http://www.vfemail.net
$14.95 Lifetime accounts! 15GB disk!
Commercial Mail Options! No bandwidth quotas!
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list