On Sat, Oct 29, 2011 at 14:08, Adam Van Ornum <[email protected]> wrote:
>
> > Date: Sat, 29 Oct 2011 21:41:57 +0100
> > From: [email protected]
> > To: [email protected]
> > Subject: Re: [pfSense] Installing on Dell R310 / Perc H200
> >
> > On 25/10/2011 15:17, Kurt Buff wrote:
> > > AFAIK, the H200 (and I believe any of the H* series including the
> > > H300) is Windows-only.
> > >
> > > I ended returning the one we had when I tried to install ESXi on it.
> > >
> > > If you find differently, I'd sure like to know.
> > >
> > > Kurt
> > >
> > > On Tue, Oct 25, 2011 at 04:49, Korves, Tim<[email protected]> wrote:
> > >> Hi there,
> > >>
> > >> we recently got a new server for use as our pfsense firewall. We've
> > >> chosen a Dell R310 with a PERC H200 "Raid-Controller" as Dell stated,
> > >> this one would work under FreeBSD 8. As of now, I'm trying to install
> > >> pfSense 2 amd64 from the normal ISO. I can boot up until the console
> > >> menu. After selecting "Install on Harddrive", the ncurses installers
> > >> starts, asks me for Console-layout etc. Another click on Continue
> > >> leads me to a blue screen with a grey bar on top. Nothing more,
> > >> nothing less. The system is stuck, even the NumLock Key won't change
> > >> it's LED. :-/ Any idea?
> > >>
> > >> Regards, Tim
> > I encountered a similar experience with R310 series recently. It did not
> > like FB8 or similar distros (PCBSD, pfSense, etc.). I tried both i386
> > (pointless, since the system has more than 8GB RAM and I intended to use
> > 64 bit kernel anyway) and amd64, none worked -- the system would freeze,
> > or in the worst case would not find any drive on the system. I could see
> > the drives with other OS, and the server came with a disc that had
> > supported pre-loader for virtually all other possible choices but any of
> > the BSDs. I ended up loading a few kernel modules (the ones coming to my
> > mind are smbus, ichsmb, several other scsi controller but not entirely
> > certain about them) until it worked. you might try that and let us know
> > if it worked in your case.
> >
> > all the best.
>
> For what it's worth, my understanding is that it is the S* series of 
> controllers which are Windows only, so definitely stay away from those.  We 
> have an R310 and just got a R515; the R310 is running Windows so I don't have 
> any experience running other OSs on that, but the R515 is running OpenSolaris 
> with an H200 controller just fine.
>

Yes, you are correct. I was thinking of the S series. My bad.

Kurt
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to