Thanks for the replies. I did setup rules this morning for just such a thing. I left the gateway as "default". I had only run into this problem with IPsec tunnels, but it seemed to be a good idea. However, this did not fix my problem.
I have tcpdump'd on all interfaces, the packets appear not to be headed anywhere. Sincerely, Joshua On Thu, Dec 8, 2011 at 09:33, Seth Mos <[email protected]> wrote: > HI, > > Op 8 dec 2011, om 18:27 heeft Joshua Schmidlkofer het volgende geschreven: > >> Yesterday, for no discernible reason, new connections ceased, in one >> direction between two local subnets. I have two interfaces, alc0 to >> 10.2.0.0/16 (BuildingA), and re2 to 10.3.0.0/16 (BuildingB). >> >> My pfSense box is a single box, with multiple internet uplinks, and is >> the default gateway for both networks. We have no filtering between >> 10.3.0.0 and 10.2.0.0. They are in another building and connected to >> us via high speed wireless. >> >> At some point yesterday, 10.3.0.0 stopped being able to initiate >> connections to hosts on 10.2.0.0. BuildingA may create new >> connections to BuildingB without incident. BuildingB may not connect >> to BuildingA at all. The packets enter PFsense, I can't get them to >> log at all, tcpdump shows them. Once in, they never come out. There >> is no log of them going anywhere. They simply cease. > > Added a firewall rule with a gateway for policy routing without making a > exception rule for the directly connected building A? > > You need to make sure that there is a rule without a gateway to building A > and vice versa. > > This is one of the fixes in 2.0.1. > > Cheers, > > Seth > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
