Sorry all wrong support thread.

Sent from my iPhone

On Dec 8, 2011, at 4:54 PM, "Daniel Haas" 
<[email protected]<mailto:[email protected]>> wrote:


Here are some specifics about your DCA.

Site ID: 7336711<tel:7336711>Serial Number: APM00113900357PDU Zone A: 7.B-2,4

PDU Zone B: 8.B.23.25

One GPDB Standard Module (aka. quarter rack)Database Version 4.1.1.3

Greenplum DCA software version 1.1.0.0


Sent from my iPhone

On Dec 8, 2011, at 4:42 PM, "Joshua Schmidlkofer" 
<[email protected]<mailto:[email protected]>> wrote:

FYI, if anyone was curious.  Whatever the problem was, it was being
hampered by a bad rule configured on one side of the network.  The
rule to negate the load-balancer for internal and IPsec networks was
mis-set.  I think I am having a problem with Chrome as well with some
of the selection dialogs in pfSense.  I can't be sure.

The problem began with a 2.0-RC3 build of pfSense, which was working
yesterday.  It stopped for not apparent reason. We identified the
missing negation rule today, and then when we put it in, somehow we
had the CiDR set wrong.  Jim from support logged in and took a look.
He identified the problem very quickly.

So, Thanks for the assistance.

Sincerely,
joshua



On Thu, Dec 8, 2011 at 09:49, Joshua Schmidlkofer 
<[email protected]<mailto:[email protected]>> wrote:
We just purchased commercial support.  So, even if we have a Stupid
Problemâ„¢, I know that it's money towards an excellent cause.


On Thu, Dec 8, 2011 at 09:42, Joshua Schmidlkofer 
<[email protected]<mailto:[email protected]>> wrote:
Thanks for the replies.   I did setup rules this morning for just such
a thing.  I left the gateway as "default".  I had only run into this
problem with IPsec tunnels, but it seemed to be a good idea.  However,
this did not fix my problem.

I have tcpdump'd on all interfaces, the packets appear not to be
headed anywhere.

Sincerely,
 Joshua

On Thu, Dec 8, 2011 at 09:33, Seth Mos 
<[email protected]<mailto:[email protected]>> wrote:
HI,

Op 8 dec 2011, om 18:27 heeft Joshua Schmidlkofer het volgende geschreven:

Yesterday, for no discernible reason, new connections ceased, in one
direction between two local subnets.   I have two interfaces, alc0 to
10.2.0.0/16 (BuildingA), and re2 to 10.3.0.0/16 (BuildingB).

My pfSense box is a single box, with multiple internet uplinks, and is
the default gateway for both networks.  We have no filtering between
10.3.0.0 and 10.2.0.0.  They are in another building and connected to
us via high speed wireless.

At some point yesterday, 10.3.0.0 stopped being able to initiate
connections to hosts on 10.2.0.0.   BuildingA may create new
connections to BuildingB without incident.   BuildingB may not connect
to BuildingA at all.   The packets enter PFsense, I can't get them to
log at all, tcpdump shows them.  Once in, they never come out.   There
is no log of them going anywhere.  They simply cease.

Added a firewall rule with a gateway for policy routing without making a 
exception rule for the directly connected building A?

You need to make sure that there is a rule without a gateway to building A and 
vice versa.

This is one of the fixes in 2.0.1.

Cheers,

Seth

_______________________________________________
List mailing list
[email protected]<mailto:[email protected]>
http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]<mailto:[email protected]>
http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]<mailto:[email protected]>
http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to