On 12/16/11 12:21, Erik Anderson wrote: > Hello all - > > Historically, I've used the Alix 2d3/2d13 boards - these have three > interfaces, and have worked perfectly for me. I now have an instance > where I'm going to need triple-wan capabilities, and am wondering what > options and/or recommendations are out there for this situation. I > would prefer to stick with an embedded setup if possible. > > I guess the other question I have is: instead of looking for a > quad-interface board, can I accomplish the same thing by just adding > an 802.1q switch and trunking a couple of the WAN circuits through the > switch? I would imagine keeping each individual WAN circuit on its own > VLAD ID would be the only way to do this is a secure and reliable > fashion. A couple of the WAN circuits will be ADSL, requiring PPPoE > negotiation - I'm not sure if this changes anything with regards to > being able to terminate the circuit at a switch instead of directly in > one of the router interfaces. > > Thank you! > -Erik
Erik... I just swapped out our (3) 100Mbps ethernet port ALIX for this: http://store.netgate.com/Netgate-FW-7535-P1693C83.aspx This has an Intel Atom (dual core 1.2GHz) and (6) Gbps ports! Initially I needed the extra horse power since I am running ~22 low-traffic IPsec VPNs and the Alix was falling over and randomly dropping VPNs when the backups ran to backup servers on the DMZ. I tried the Soekris VPN1411 Crypto accelerator in the ALIX but it didn't seem to help with that issue. The FW-7535 solved that problem and of course increased my backup speeds as well. Plus I have several additional ports to work with so this is a winner on all fronts - except that it costs quite a bit more than an ALIX. P.S. Not affiliated with Netgate etc... Just like the product. -- Bill Arlofski Reverse Polarity, LLC http://www.revpol.com/ _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
