On 3/14/2012 7:12 AM, Gavin Will wrote:

Hi there,


I have a BT infinity "fibre" (fibre to cabinet) connection with 5 static IP addresses.

I have added the 5 Ips as IP Alias and can get NAT to work on the virtual IP work and Outbound Nat to show it is coming from that IP alias from the local network (quick what is my ip test in google)

Setting up an IPSec VPN to another PFsense box (and selecting the Interface "myipalias" -- not selecting wan) i get the error "IPSEC-SA was queued due to no phase1 found"

http://doc.pfsense.org/index.php/IPsec_Troubleshooting hints at it being an issue on the remote side but other VPNs are connected fine.

Any ideas on this or is there a guide on IPSec with Virtual IP at all?

Many Thanks

Gavin


I would try making it work on the WAN first, after that works, change it to the virtual IP. I've never tried with Virtual IP's, but I've had this same error, usually it involves a config problem, triple check your configs, and restart IPSec on both sides.

Adam
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to