Am 01.05.2012 17:34, schrieb Andrew @ ATMlogic.ca:
There just is not enough detail to say why it's happening. Even seeing
the output of the banner on the console menu would be more than we're
seeing here. Going on pure speculation only gets us so far.
As below. Connecting a PC to sis0 (through a switch) will get an IP
(10.0.0.100) however and through the web page I can ping external address's
yet I cannot complete a connection to any external website. I will do a
reset to factory defaults, get a laptop connected to the LAN and do some
more testing.
After the #4 reset what do you suggest as my next 3-5 steps?
*** Welcome to pfSense 2.0.1-RELEASE-nanobsd (i386) on lulu ***
WAN (wan) -> sis1 -> 192.168.0.73 (DHCP)
LAN (lan) -> sis0 -> 10.0.0.1
OPT1 (opt1) -> sis2 -> 192.168.0.15
0) Logout (SSH only) 8) Shell
1) Assign Interfaces 9) pfTop
2) Set interface(s) IP address 10) Filter Logs
3) Reset webConfigurator password 11) Restart webConfigurator
4) Reset to factory defaults 12) pfSense Developer Shell
5) Reboot system 13) Upgrade from console
6) Halt system 14) Disable Secure Shell (sshd)
7) Ping host
Enter an option:
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
You have the same subnet on WAN and OPT1.
Remove the OPT1 (or move to a different subnet) and it will probably
start working.
Greetings
Matthias May
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
