> -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Sean Cavanaugh > Sent: Tuesday, May 01, 2012 12:25 PM > To: 'pfSense support and discussion' > Subject: Re: [pfSense] pf vrs mono? > > > > > -----Original Message----- > > From: [email protected] > [mailto:[email protected]] > > On Behalf Of Andrew @ ATMlogic.ca > > Sent: Tuesday, May 01, 2012 12:02 PM > > To: 'pfSense support and discussion' > > Subject: Re: [pfSense] pf vrs mono? > > > > >You have the same subnet on WAN and OPT1. > > >Remove the OPT1 (or move to a different subnet) and it will probably > > >start working. > > >mailman/listinfo/list > > > > > > Did a factory reset assigned WAN and LAN and no OPT have not touched > > ANY other config. (Also have not tested with laptop on LAN yet, but > > will just suggest that its not going to work) WAN is getting DHCP IP > > address from > SBS > > Server 2003 that his controlling DNS (IP address 192.168.0.5) my > > Gateway/Firewall is SME 7.4 on IP address 192.168.0.254. In "some" > > cases > I > > have seen devices look to the gateway for DNS and have had to manually > > set the DNS as 192.168.0.5 > > > > What is my next step? > > > > I would still disable the option previously stated that blocks private VLANs, > otherwise, that should be all you need to get it to work. > Private networks...not VLANS. Been doing too much VLAN programming today.
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
