Hi Mathieu, I did several tests, not even believing it downloaded a snapshot of today November 20 and had the same problem, did not record the image in full speed. I did test installation directly on the server and also by IDRAC also had the same problem, some believe it is even incopatibilidade. I read in many forums that bsd is not compatible with most Dell servers, in incluve own mailing list linux DELL was informed about it. I think I'll leave for another solution, like a lot of pfsense, but in this case it will not be possible to have this excellent software Thanks, Luiz > Date: Tue, 20 Nov 2012 22:49:51 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [pfSense] Problems with installing pfSense Kernel 8.1 on R420 > Poweregde? > > Hi Luiz > > Much to answer... ;-) > > Adam is right, the issue comes from the CD. It can come from your media, > your burner (I had some issues in that area too once). Make sure you don't > burn at maximum speed though. > > It seems you're not using the DRAC-mounted ISO but your integrated DVD, > maybe the iDRAC (even with Adam's warnings) could yield better results? > > It seems you're using a quite old image from November 2nd, If you're > stuck at F10, > this might be caused a couple of images that had this issue make sure > to get a fresh image. > > You'll at least want a ISO built after November 7th to get the mfi > backport, but around then > the installer was messed and fixed. (well, that's what daily build are > for: testing) > > I hope this gives you some ideas what to try next, at least > it doesn't look like a desperate situation, because your OS starts booting, > even up to the installer. > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
