Manually pushing routes from the advanced section is in general not
needed if the 'local network(s)' is filled in in the WebGui.
Holger Bauer schreef op 19-3-2014 10:44:
Hi Mohan,
make sure you have appropriate rules under firewall>rules, openvpn tab
to allow access. Also make sure your routing is working correctly. You
might need to push some routes to the clients, depending on how your
network is setup. You can do that on the openvpn-server settings at
the very bottom (advanced configuration), for example add the
following there:
push "route 192.168.1.0 255.255.255.0";push "route 192.168.2.0
255.255.255.0"
Regards
Holger
2014-03-19 10:24 GMT+01:00 A Mohan Rao <[email protected]
<mailto:[email protected]>>:
Hello Team,
Hello,
i have configured openvpn road warrior also client is properly
connected
from outside internet network.
but not able to access server end network and servers's.
can anybody give any help where is do any wrong steps.
Thanks
Mohan
_______________________________________________
List mailing list
[email protected] <mailto:[email protected]>
https://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]
https://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]
https://lists.pfsense.org/mailman/listinfo/list
