Hi All! I have pfsense-2.1.3 with configuration like following: — one physical interface — 10 VLANs. All VLANs are OPTx interface (interfaces marked as LAN or WAN by pfsense are disabled) — 2 VLANs used to Multi-WAN connection — 3-4 virtual IP (IP-address aliases) at WAN VLANs — about 150 aliases with fixed IP and/or DNS-names — about 25 NAT port-forward rules (from WAN to other interfaces) — about 20 floating rules — many rules for every VLAN
My problem is following. When I add alias or firewall rule and apply it then port-forward via address aliases at WAN VLANs is not worked about 1-10 minutes. Sometimes no incoming traffic on this interfaces (looks like no ARP entries at provider router for this address). Sometimes traffic blocked by default rule (looks like no other rules installed some minutes) So my question: is it network/hardware/software problem or it pfsense feature? (this is my first pfsense installation and first PF experience — I use FreeBSD and IPFW many years before without any problems) Thanks! -- CU, Victor Gamov [email protected] _______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
