On 17Sep, 2014, at 07:07, Ryan Coleman <[email protected]> wrote: > What hardware are you using? Specifically what model if it’s a negate?
This is Intel-based server: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz 4GB mem two integrated em NICs (em0 used only) I’ll check motherboard later but I think it server class motherboard. > On Sep 16, 2014, at 1:53, Victor Gamov <[email protected]> wrote: > >> Hi All! >> >> I have pfsense-2.1.3 with configuration like following: >> — one physical interface >> — 10 VLANs. All VLANs are OPTx interface (interfaces marked as LAN or WAN by >> pfsense are disabled) >> — 2 VLANs used to Multi-WAN connection >> — 3-4 virtual IP (IP-address aliases) at WAN VLANs >> — about 150 aliases with fixed IP and/or DNS-names >> — about 25 NAT port-forward rules (from WAN to other interfaces) >> — about 20 floating rules >> — many rules for every VLAN >> >> My problem is following. When I add alias or firewall rule and apply it then >> port-forward via address aliases at WAN VLANs is not worked about 1-10 >> minutes. Sometimes no incoming traffic on this interfaces (looks like no >> ARP entries at provider router for this address). Sometimes traffic blocked >> by default rule (looks like no other rules installed some minutes) >> >> >> So my question: is it network/hardware/software problem or it pfsense >> feature? (this is my first pfsense installation and first PF experience — I >> use FreeBSD and IPFW many years before without any problems) >> >> Thanks! >> >> -- >> CU, >> Victor Gamov >> [email protected] >> >> >> >> >> _______________________________________________ >> List mailing list >> [email protected] >> https://lists.pfsense.org/mailman/listinfo/list > > _______________________________________________ > List mailing list > [email protected] > https://lists.pfsense.org/mailman/listinfo/list -- С уважением, Гамов Виктор _______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
