Just wanted to thank those of you who replied. Finally got the card
noticed in pFsense. Had to use the add hardware feature on the VM. Now
the problem is getting it to route traffic. I am able to ping the two
ports from the pfsense diag menu but am not able to ping outside the
network. I did create a rule to pass all traffic but still nothing. Is
there something special I need to do to get the two new ports to work?
Also is there a way to have the dhcp range the same as the lan so that
it works like a consumer of the shelf router? Basically additional ports
in the same net range.
On 9/19/2014 1:37 PM, Adam Thompson wrote:
[pfSense] Adding Ethernetports There's also the unofficial VMware ESXi
white-box HCL, but it hasn't really been updated since v4.x.
Agreed that if this is anything more than a test system, stick with
the HCL and a support contract. Been there, done that, have the scars
to prove it ...
-Adam
On September 19, 2014 12:18:31 PM CDT, Paul Beriswill
<paul.berisw...@pdfcomplete.com> wrote:
I have had mixed results trying to find support for hardware that
is not on the vmWare HCL and often spend way too much time hunting
for solutions. You are *much* better off sticking with officially
supported hardware.
That being said, This link *may* have the drivers that you are
looking for ...
https://my.vmware.com/web/vmware/details?downloadGroup=DT-ESXI55-INTEL-IGB-42168&productId=353
Should probably take this to one of the vmware support groups.
Paul
On 09/19/2014 11:28 AM, Brian Caouette wrote:
Yes VM. I do not see the card listed there either. I do not
understand VM and all the plugs and drivers. Can you point me in
the right direction?
On 9/19/2014 11:17 AM, Paul Beriswill wrote:
Your pfSense is running on a VM ... correct?
Does vmware recognize the nic? I know some versions of esx need
custom drivers for even some intel NIC's.
Paul
On 09/19/2014 09:31 AM, Brian Caouette wrote:
I added a dual port nic to my pfsense box and it doesn't show the
additional ports.
The new nic doesn't show anywhere. I am using a PowerEdge 2850
and an
Intel Card. I am also using vmware on the machine.
Any ideas what may be going on?
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
--
*Paul Beriswill*
PDF Complete Inc | www.pdfcomplete.com
<http://www.pdfcomplete.com/>
550 Club Drive, Ste. 477 | Montgomery, TX 77316
512.263.0868 x 707 direct | paul.berisw...@pdfcomplete.com
<mailto:paul.berisw...@pdfcomplete.com>
PDF Complete <http://www.pdfcomplete.com/>
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
--
*Paul Beriswill*
PDF Complete Inc | www.pdfcomplete.com <http://www.pdfcomplete.com/>
550 Club Drive, Ste. 477 | Montgomery, TX 77316
512.263.0868 x 707 direct | paul.berisw...@pdfcomplete.com
<mailto:paul.berisw...@pdfcomplete.com>
PDF Complete <http://www.pdfcomplete.com/>
------------------------------------------------------------------------
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
