Good afternoon- This is in regards to pfsense-2.1.4-RELEASE.
This morning my ISP (finally) turned on IPv6 on our circuit. They assigned a /126 P2P link for the WAN and are routing a /48 to us. I have the WAN interface configured without issue, and am able to ping6 from the router itself to external addresses. The problem arose when I added the static IPv6 configuration to my LAN interface. I chose an arbitrary /64 subnet for the LAN and assigned an IP to the interface. When I applied this configuration, *all* traffic to and through the router (both v4 and v6) stopped. I couldn't ping the v4 address of the router, etc. I ended up having to attach to the serial console and restore a previous config file in order to restore connectivity. My questions are: 1) How was adding v6 addressing information to the LAN interface able to affect v4 traffic? 2) How can I add static v6 configuration to the LAN interface sucessfully? This all seemed like it should be a very simple task, but apparently I'm missing something. Thank you! -Erik _______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
