Sorry to reply to myself here, but 2.2 in combination with the Intel X540-2 card isn't very stable. The card keeps dropping the Phy which is fine on 2.1.5.
I've just reverted and reinstalled 2.1.5 with a backup config. Although the nmbclusters change did make the 2nd port of the ix card power on it eventually hung the network after half an hour or so. Due diligence. Regards, Seth Seth Mos schreef op 26-1-2015 om 11:12: > Chris Buechler schreef op 24-1-2015 om 3:24: >> Details on the blog: >> https://blog.pfsense.org/?p=1546 > > 2 Upgrades done so far, one had a different Architecture autoupdate URL, > that one updated from AMD64 to i386, please don't do that. > > Also, I have issues with the Intel X540-2 10G card now, it's throwing a > few errors. Port 0 goes into a flapping state while port 1 never comes up. > > [zone: mbuf_jumbo_9k] kern.ipc.nmbjumbo9 limit reached > ix1: Could not setup receive structures > > That didn't happen on 2.1.5 at all, apparently the limits have changed. > > In FreeBSD 10 these changes need to into loader.conf during boot, > different from before. > https://pleiades.ucsc.edu/hyades/FreeBSD_Network_Tuning > > kern.ipc.nmbclusters=262144 > kern.ipc.nmbjumbop=262144 > kern.ipc.nmbjumbo9=65536 > kern.ipc.nmbjumbo16=32768 > > Regards, > > Seth > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
