Hello; I'm testing the installation of pfSense and using VirtualBox I can also create two network interfaces, one for the WAN (em0) and the other for internal network (LAN) em1 far as I did well, but I have some problems with my IP's range of IP's from my provider are 192.168.0.1 (router) in the PFSENSE I assigned the network card for the WAN 192.168.0.10 IP DHCP and for the LAN (INTERNAL Network ) I put 192.168.0.20 and give that addresses for DHCP and give the range of 192.168.0.30 to 192.168.0.40
adapter wan this as gateway and LAN virtualbox this as internal network and there is the problem because by the IP address of the LAN can not access the web configuration unless I changed the LAN as a gateway link because from my physical LAPTOP I try to PING the virtual LAN Adapter with no results at all I can´t access the web-configuration from the LAN (Internal Network) unless I changed the LAN adapter as a Network Adapter but is not suppose to be that way is anyone could help me with this matter I also tried to use as internal network IP address 172.16.30.10 Kind regards; Alfredo l ________________________________________________ NOTA CONFIDENCIAL: La información contenida en este correo-electrónico y cualquier archivo adjunto es de uso privilegiado y/o confidencial y solo puede ser utilizada por la persona, entidad o compañía a la cual esta dirigido. Si usted ha recibido este mensaje por error, favor destruirlo y avisar al remitente. Si usted no es el destinatario no deberá revelar, copiar, distribuir o tomar cualquier acción basado en los contenidos del mensaje. Cualquier retención, diseminación o distribución total o parcial no autorizada de este mensaje esta estrictamente prohibida y sancionada por la ley. _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
