You need to load the web interface from the LAN IP - I do not believe it will route properly from the remote one without getting the initial configuration done.
What happens when you ping the laptop’s IP from the terminal in your VM Client? > On Aug 8, 2015, at 4:01 AM, Alfredo Tapia Sabogal <[email protected]> > wrote: > > Vick, Thank you for your prompt response, i change my LAN IP address to > 192.168.1.40/24 and the WAN to 192.168.0.10 /24 so when I go to the internet > explorer and I wrote the LAN ip address or I ping tolds me that the host is > unreachable so the web configurator doesn’t load should I do something else > ? my laptop ip address is 192.168.0.4 /24 even when I ping the LAN/WAN is > not reachable what should I do please help!!! > > Kind Regards > > Alfredo Tapia Sabogal > [email protected] > ________________________________________________ > NOTA CONFIDENCIAL: > La información contenida en este correo-electrónico y cualquier archivo > adjunto es de uso privilegiado y/o confidencial y solo puede ser utilizada > por la persona, entidad o compañía a la cual esta dirigido. Si usted ha > recibido este mensaje por error, favor destruirlo y avisar al remitente. Si > usted no es el destinatario no deberá revelar, copiar, distribuir o tomar > cualquier acción basado en los contenidos del mensaje. > Cualquier retención, diseminación o distribución total o parcial no > autorizada de este mensaje esta estrictamente prohibida y sancionada por la > ley. > > -----Mensaje original----- > De: List [mailto:[email protected]] En nombre de Vick Khera > Enviado el: viernes, 07 de agosto de 2015 01:17 p.m. > Para: pfSense Support and Discussion Mailing List <[email protected]> > Asunto: Re: [pfSense] pfSense no access to web configurator from internal > network > > On Thu, Aug 6, 2015 at 1:12 PM, Alfredo Tapia Sabogal < > [email protected]> wrote: > >> internal network (LAN) em1 far as I did well, but I have some problems >> with my IP's range of IP's from my provider are 192.168.0.1 (router) >> in the PFSENSE I assigned the network card for the WAN 192.168.0.10 IP >> DHCP and for the LAN (INTERNAL Network ) I put 192.168.0.20 and give >> that addresses for >> > > You will have to set the IP for the LAN to something else via the console, > or run in a mode disconnected from the LAN so your desktop can talk to the > pfSense LAN IP. > > You can't have the same networks on both LAN and WAN. > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
