I have an SG-1000 on which I experience very low throughput.
When I plug my laptop to the cable that normally goes into the SG-1000's WAN port, I get a download speed of roughtly 100mbit (ISP limited) when I run "curl http://ipv4.download.thinkbroadband.com/1GB.zip >/dev/null"
Plugging that same cable into the SG-1000 and connecting my laptop directly to its LAN port instead, I get less than 10mbit.
Running the curl command directly on the console of the SG-1000 gives me the same abysmal result.
[2.4.0-BETA][root@my.network.local]/root: curl http://ipv4.download.thinkbroadband.com/1GB.zip >/dev/null % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 2 1024M 2 29.5M 0 0 598k 0 0:29:10 0:00:50 0:28:20 523k
This is after I just flashed it with today's image (20170207) and ran through the setup wizard in the browser. No other settings have been altered.
What can I do here? Best regards, Øyvind Hvidsten _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
