I'm only doing Win8 onto them, and don't have the D4's, only the Celerons and i5's! Driver pack is now the latest from Intel, but been going a few different packs.
I would check the setup logs to see if you can figure out what happens, might be CPU spiking due to bad driver? //A From: [email protected] [mailto:[email protected]] On Behalf Of Chris Carbone Sent: den 11 maj 2015 19:04 To: [email protected] Subject: RE: [mssms] Intel NUC OSD extremely slow when "Setup is installing devices" We are using the D34010WY model and Windows 7 x64 which deploys just fine to every other laptop/desktop/mini-pc we have. It's just these NUC's causing the headache. I'm in the process to try an older i217-LM Ethernet driver. I noticed I was using the driver version 12.12.80.19 for the Intel NUC. Then I looked at the UK boxes that we bought, which essentially has the same hardware and see it's getting deployed with an older version of the i217-LM Ethernet driver, 12.10.30.0. What version of this driver are you using? Thanks From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Andreas Hammarskjöld Sent: Monday, May 11, 2015 12:33 PM To: [email protected]<mailto:[email protected]> Subject: RE: [mssms] Intel NUC OSD extremely slow when "Setup is installing devices" Which NUC and what OS? Mine deploy just fine... From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Chris Carbone Sent: den 11 maj 2015 16:54 To: <[email protected]<mailto:[email protected]>> Subject: RE: [mssms] Intel NUC OSD extremely slow when "Setup is installing devices" I did add this step in hopes it would make a difference with this problem but nothing has changed unfortunately. This problem also resides outside of the WinPE environment, so I'm not sure that this step would have any impact in either way. I think my next attempt at this problem will be to make a new test driver package that excludes the NIC drivers, both wireless and wired. I've read a number of people struggling with these drivers and wonder if this is what's causing this random problem. I think I can also look at the bdd log? And try to find which driver it's getting stuck on. If I find what fixes this, I'll reply to this thread. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Stuart Watret Sent: Monday, May 11, 2015 10:15 AM To: <[email protected]<mailto:[email protected]>> Subject: Re: [mssms] Intel NUC OSD extremely slow when "Setup is installing devices" Have you tried setting the powercfg to max in the TS? Not tried it on those, but it does move things along with most hardware. By default the powercfg in winpe is set to "easy cowboy". Sent from a dog and bone. On 7 May 2015, at 16:22, Chris Carbone <[email protected]<mailto:[email protected]>> wrote: Has anyone else seen this issue where at specifically 52% on Setup is installing devices these NUC's just drag and drag. Each percent takes 10 - 15 minutes after it hits 52%. If you just let it go, it'll eventually finish and everything is fine but I would like to nail down what is causing this. Now I'm also using these same Intel NUC 64-bit drivers for the Quiet PC's we have. The Quiet PC's are essentially the same exact kit that these Intel NUC's are, same hardware and this problem does not happen on the Quiet PC's. I've tried different SIR drivers which I've read around the net that could be causing this. I've also turned off the consumer IR setting within BIOS and this did not change anything. And just to add more nonsense to this problem, this hanging issue doesn't always happen. I would guess around 35-40% of the time this problem comes up. Any help would be greatly appreciated as this is making me insane! This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately.
