Hi,
Also to mention - G6 has a "backdoor" - there is no way that you can
password-protect RTSP stream from those cameras. So good point is to
firewall 554 port to only Allowed IP Range when camera is public accessible.
Marcin
W dniu 2014-12-12 11:37, Ross Finlayson pisze:
We are still using 2009-02-23 (legacy reasons I'm trying to work
around and remove) and the error is happening with the compiled
openRTSP.exe and our code so I was ready to point the finger at the
camera misparsing the interleaved data.
We also tested with VLC (in interleaved mode) and 2014-12-09 and we
have not yet seen this issue after 24 hours.
I have absolutely no interest in whether or not old versions of our
software work OK, because old versions are not supported.
Just to clarify: Does "openRTSP" - using the latest version of our
software - work OK with this server (camera)? If so, then there is no
issue.
If, however, "openRTSP" - using the latest version of our software -
has a problem with this server, then please post the complete RTSP
diagnostic output (printed by "openRTSP" to stderr) to this mailing
list, and I'll take a look at it.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
