Clean where you need to fasten with a wire brush and then use aceton (use Nitro gloves and ventilate and don't breath and have NO FIRES or SPARKS! But nothing works better than aceton to clean fiberglass, just don't get it on ANY other plastics or you will be very sorry.)
Use West epoxy with added high density filler for strength, and microfibers to 'gel so it doesn't drip. You can get West in small quick set kits, but beware you have little working time with this stuff. Glue small wooden blocks down to screw larger things into. But...closed shelves (I use sliding doors) work far better esp for things like knives that will get away at exactly the wrong time.-Ken _______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [EMAIL PROTECTED] To unsubscribe send an email to [EMAIL PROTECTED] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
