I would prefer to pull it out from the bow, but if you can't, I'd get the tow boat up close to the stern and run the wheel up fast for a moment and then back off to get a prop wash wave under the Albin and pull it off slowly. You might try that several times to get it rocking. Put any weight on the Albin bow to help lift the stern. If there is an A frame on the work boat use it to lift the Albin. Using the Albin prop to help back off might help in the prop wash timing. Any way you can, push water up under the Albin or float it higher. **************Plan your next getaway with AOL Travel. Check out Today's Hot 5 Travel Deals! (http://travel.aol.com/discount-travel?ncid=emlcntustrav00000001)
_______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [EMAIL PROTECTED]
To unsubscribe send an email to [EMAIL PROTECTED] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
