Re: ISO Pace-Edwards Mast Steps
Several places where this has appeared have generated offers of looking in salvage stores, but have no idea of what they look like, making a quickie look around a bit challenging. So, I have put up pix of my single step for perusal. You can find them by clicking on my gallery in my signature, and then the obvious link into the section dealing with this need. You'll note, as commented in my original, that these are considerably larger than the typical. There's a 2"+ rise before the diagonal part, almost 9" of interior height, nearly 6" of footplate length (accommodating my wide feet) and a full (I forgot to measure for the camera, sorry) 2" footplate depth. Giveaways (if the preceding aren't enough) are the "Pace-Edwards" and "Made in USA" stamped in the footplate area, plus the extrusion which has the footplate grooves going the entire length of the fixture and, on the reverse (outside), a sine-wave reinforcement, as seen in the pix, particularly the end-on shot. So, I just need one, but might take 20, if you found a source for it. As before, writing directly to me [email protected] is best to communicate with me in such event. Thanks! L8R Skip Morgan 461 #2 SV Flying Pig KI4MPC See our galleries at www.justpickone.org/skip/gallery! Follow us at http://groups.google.com/group/flyingpiglog and/or http://groups.yahoo.com/group/TheFlyingPigLog "Believe me, my young friend, there is *nothing*-absolutely nothing-half so much worth doing as simply messing, messing-about-in-boats; messing about in boats-or *with* boats. In or out of 'em, it doesn't matter. Nothing seems really to matter, that's the charm of it. Whether you get away, or whether you don't; whether you arrive at your destination or whether you reach somewhere else, or whether you never get anywhere at all, you're always busy, and you never do anything in particular; and when you've done it there's always something else to do, and you can do it if you like, but you'd much better not." _______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://liveaboardonline.com/mailman/listinfo/liveaboard To subscribe send an email to [email protected] To unsubscribe send an email to [email protected] The archives are at http://www.liveaboardonline.com/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
