the PMON is only able to read from ext3 and fat , so you should pay attention to it while you put your kernel .
于 2013年10月21日 11:27, zhongjj 写道: > the debian_wheezy_mipsel_basesys.tar.gz was buit from debootstrap. > I suggest you build one yourself. > > 于 2013年10月21日 11:07, h0ost 写道: >> On 10/20/2013 09:12 PM, zhongjj wrote: >>> I have one on hand , >>> http://updates.lemote.com/~zjj/debian_wheezy_mipsel_basesys.tar.gz >>> >>> do you know any pmon command ? like load >>> lsdev >>> load (wd0,0)/PATH_TO_KERNEL >>> boot >> Thanks for your help. I'm learning PMON now. >> I've untarred your image and when I attempt to load it in PMON via: >> >> load (wd0,5)/wheezy/boot/vmlinuz (# my "/" is located on /dev/sda5 >> partition). >> >> I get: "Exception Cause=TLB miss on load or ifetch, ..." >> >> The same happens when I attempt to load the pre-installed kernel: >> >> load (wd0,5)/boot/vmlinuz >> >> I'm sure I'm missing something very basic. >> >> >> Again thanks for your help. >> >> >> >>> If you don't have any initramfs, you could download from >>> http://mirror.lemote.com/LOonux3/Images/recover/ls3a-niface/ >>> just donwload boot.cfg and vmlinuz to a usb flash, there's an initramfs >>> built in the kernel for recovery tool, if you boot from >>> this kernel, just forget the green "recovery tool" , but switch into a >>> new terminal (ctrl+alt+Fx) >>> >>> I did not support a boot.cfg for booting. you could write it yourself >>> for PMON. (put it on the first partition, or boot dir under the first >>> partition). >>> boot.cfg example below: >>> >>> timeout 3 >>> default 0 >>> showmenu 1 >>> title wheezy >>> kernel (wd0,0)/boot/vmlinuz >>> args console=tty root=/dev/sda1 >>> >>> >>> 于 2013年10月21日 01:45, h0ost 写道: >>>> On 10/20/2013 12:50 AM, 钟佳佳 wrote: >>>>> While booting there would be a dragon logo, precess 'u', select the >>>>> recovery title if you want to >>>>> use an initramfs in ram, then you could partition the disk, and >>>>> install the os-img you get >>>>> from debian.org (wheezy). >>>>> >>>> Thank you very much for your help. >>>> One quick question: Is there a debian wheezy image that already includes >>>> the loongson-3a kernel that was linked in one of the messages? >>>> >>>> If not, I am thinking of installing that particular kernel on my laptop >>>> now, then update the repositories in /etc/apt/sources... to point to >>>> offical debian wheezy, then apt-get dist-upgrade. >>>> Would that work? >>>> >>>> >>>> >>>>> ------------------ Original ------------------ >>>>> From: "h0ost";<[email protected]>; >>>>> Date: Sun, Oct 20, 2013 06:51 AM >>>>> To: "loongson-dev"<[email protected]>; >>>>> >>>>> Subject: [loongson-dev] new Loongson-3A laptop, basic questions >>>>> >>>>> >>>>> >>>>> Hello, >>>>> >>>>> I just received my Loongson-3A laptop. I would like to install an >>>>> alternative OS. Preferably, Debian Wheeyz, Parabola, anything really. >>>>> >>>>> I can't find any instructions in English on how to install such OS, or >>>>> where to get OS images. I realize this is probably because the laptop >>>>> is new. >>>>> >>>>> If someone can help me figure this out, I will be most thankful. I am >>>>> comfortable GNU/Linux user, and can probably figure out most problems, >>>>> but I need help with the basics. >>>>> >>>>> Thank you, >>>>> Tonny >>>>> > -- -------------------------------------------------- 江苏中科梦兰电子科技有限公司 软件部 钟佳佳 TEL:0512-52308628 FAX:0512-52308688 E-mail:[email protected] Add: 江苏省常熟市虞山镇梦兰工业园 -------------------------------------------------- -- You received this message because you are subscribed to the Google Groups "loongson-dev" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/loongson-dev. For more options, visit https://groups.google.com/groups/opt_out.
