Just installed LPRng-3.6.18-1.i386.rpm and ifhp-3.3.16-1.i386.rpm and re-tested. Unfortunately the end result is the same. Do you want the status.deslz file ? Additional small problem : Redhat 6.2 executes /etc/rc.d/init.d/killall (see below) on reboot or powerdown. For each file listed in /var/lock/subsys/ it sends the corresponding script in /etc/rc.d/init.d a stop parameter. Unfortunately the /etc/rc.d/init.d/lprng script does not match with the /var/lock/subsys/lpd file and hence an error message is generated. [EMAIL PROTECTED] wrote: > > > From [EMAIL PROTECTED] Fri Jun 9 07:53:10 2000 > > Date: Fri, 09 Jun 2000 09:23:35 -0400 > > From: David Livingstone <[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > CC: David Kerr Livingstone <[EMAIL PROTECTED]> > > Subject: LPRng: pclbanner problems from LPRng-3.6.14-1 > > > > > > Problem and a question : > > > > I. Problem : > > > > I think I have found a problem with the pclbanner(sh version) in > > 3.6.14-1. The verion in 3.6.13.1 worked correctly but the 14-1 > > version failed. > > > > Fixed. > > > - OS : red hat 6.2 > > - lprng : LPRng-3.6.14-1.i386.rpm > > - ifhp : ifhp-3.3.13-1.i386.rpm > > - printer : HP Laserjet 8000 connected to a ExtendNet SX server(parallel). > > > > - printcap : > > deslz:\ > > :lp=deslz%9100:\ > > :sd=/usr/spool/lpd/deslz:\ > > :mx#0:\ > > :bp=/usr/libexec/filters/pclbanner:\ > > :ifhp=model=hp4000,status@ > > :if=/usr/libexec/filters/ifhp: > > > > - Symptom : The banner page is messed up badly with the : > > Title: -Lroot > > Printer : -Qdeslz > > Jobid: -CA > > Date : -Hxsmtl2.cn.ca > > > > I will provide the status.deslz file below for the provided > > error messages. > > > > The version of pclbanner(perl version) from 3.3.13-1 works > > correctly. > > > > II. Question > > > > What ifhp model should I use for the above printer(ie HP Laserjet > > 8000) ? There appears to be no entry in the docs or ifhp.conf for > > a Laserjet 8000. A 8000 laserwriter is listed but no laserjet. The > > printer has : > > - PS,PCL > > - 16MB > > - duplex > > - two paper trays : 2 : letter, 3: 11x17 > > > > Should have been LaserJet. Wonder how long this has been there... > > Patrick > > ----------------------------------------------------------------------------- > If you need help, send email to [EMAIL PROTECTED] (or lprng-requests > or lprng-digest-requests) with the word 'help' in the body. For the impatient, > to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] > with: | example: > subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] > unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] > > If you have major problems, send email to [EMAIL PROTECTED] with the word > LPRNGLIST in the SUBJECT line. > -----------------------------------------------------------------------------
> From [EMAIL PROTECTED] Fri Jun 9 07:53:10 2000 > Date: Fri, 09 Jun 2000 09:23:35 -0400 > From: David Livingstone <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > CC: David Kerr Livingstone <[EMAIL PROTECTED]> > Subject: LPRng: pclbanner problems from LPRng-3.6.14-1 > > > Problem and a question : > > I. Problem : > > I think I have found a problem with the pclbanner(sh version) in > 3.6.14-1. The verion in 3.6.13.1 worked correctly but the 14-1 > version failed. > Fixed. > - OS : red hat 6.2 > - lprng : LPRng-3.6.14-1.i386.rpm > - ifhp : ifhp-3.3.13-1.i386.rpm > - printer : HP Laserjet 8000 connected to a ExtendNet SX server(parallel). > > - printcap : > deslz:\ > :lp=deslz%9100:\ > :sd=/usr/spool/lpd/deslz:\ > :mx#0:\ > :bp=/usr/libexec/filters/pclbanner:\ > :ifhp=model=hp4000,status@ > :if=/usr/libexec/filters/ifhp: > > - Symptom : The banner page is messed up badly with the : > Title: -Lroot > Printer : -Qdeslz > Jobid: -CA > Date : -Hxsmtl2.cn.ca > > I will provide the status.deslz file below for the provided > error messages. > > The version of pclbanner(perl version) from 3.3.13-1 works > correctly. > > II. Question > > What ifhp model should I use for the above printer(ie HP Laserjet > 8000) ? There appears to be no entry in the docs or ifhp.conf for > a Laserjet 8000. A 8000 laserwriter is listed but no laserjet. The > printer has : > - PS,PCL > - 16MB > - duplex > - two paper trays : 2 : letter, 3: 11x17 > Should have been LaserJet. Wonder how long this has been there... Patrick ----------------------------------------------------------------------------- If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
