> From [EMAIL PROTECTED] Mon Jul 10 14:17:06 2000
> Date: Mon, 10 Jul 2000 15:54:17 -0400
> From: David Livingstone <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: [Fwd: LPRng: pclbanner problems from LPRng-3.6.14-1]
>
>
>
> Thanks ... I think :) The beer sounds like a great idea ! Any stouts on tap ?
>
> With respect to the "status" problem below I had tacked this problem onto
> my pclbanner post of Jun 29 at ~15:31. I include it again below :
>
>
> I also attempted removing the ",status@" ifhp entry to see what would happen.
> (remember I have a HP 8000 connected - parallel - to a ExtendNet SX 2811C)
>
> deslz:\
> :lp=deslz%9100:\
> :sd=/usr/spool/lpd/deslz:\
> :mx#0:\
> :bp=/usr/libexec/filters/pclbanner:\
> :ifhp=model=hp8000,status@\
^^^^^^^^^^^ possible typeo
You might want to use status@: <--
> :if=/usr/libexec/filters/ifhp:
>
> An lpr(using the perl pclbanner:) to deslz hangs for a couple of minutes and
> then completes properly. The pagecount information in the status file is correct.
> What can I do to keep the pagecount but get rid of the hang ? The relevant lines
> from the status file are given below :
Are the \ at the end necessary?
Patrick Powell Astart Technologies,
[EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D,
Network and System San Diego, CA 92123
Consulting 858-874-6543 FAX 858-279-8424
LPRng - Print Spooler (http://www.astart.com)
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
