> From [EMAIL PROTECTED] Fri Jul 14 13:25:33 2000
> Date: Fri, 14 Jul 2000 14:52:08 -0400 (EDT)
> From: "Justus J. Addiss" <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: LPRng: Page count for HP IIIsi incorrect
>
>
> I'm trying to use LPRng 3.6.20 w/ifhp-3.3.18 to get page counts from our
> (ancient but still working great) HP IIIsimx printer. The printer works fine
> but the page page count is always zero and the page counter value is
> always the same number. The printcap entry is:
>
> laser2|ps2|HP LaserJet IIIsi via Emulex NetJet|East Copy Room
> :lp=laser2%2501
> :ifhp=model=hpiiisi,sync@,pagecount=ps,waitend=ps
> :if=/usr/local/libexec/filters/ifhp
> :vf=/usr/local/libexec/filters/ifhp -c
> :of=/usr/local/libexec/filters/ofhp
> :fx=flpv
> :pl=60
> :pw=83
> :sh
> :rw
>
> When I run the following command:
>
> lptest 25 25 | ./ifhp
>-Tdev=laser2%2501,debug=2,model=hpiiisi,trace,sync@,pagecount=ps
>
> I get this debugging output which shows a pagecount. Unfortuantely it's always
> the SAME page count, job after job. The pagecount printed on the test page
> using the local printer test function is currently 667163 and does increment with
> each page printed.
>
> So where is the page count Ifhp is getting coming from and why does it not
> change?
I don't know. Unfortunately, this printer is long out of support,
and my spy deep inside HP just cackled like a maniac when I asked him.
This is, as they say, not promising.
I suspect that there is something in the firmware of the HP printer that
is reading the EEPROM that holds the pagecounter value and is not updating this.
If you turn the printer on and off, do you get a new value?
Patrick
Patrick Powell Astart Technologies,
[EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D,
Network and System San Diego, CA 92123
Consulting 858-874-6543 FAX 858-279-8424
LPRng - Print Spooler (http://www.astart.com)
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
