> From [EMAIL PROTECTED] Tue Aug 29 09:49:17 2000
> Date: Tue, 29 Aug 2000 17:10:27 +0200
> From: Thomas Emmel <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: LPRng: Again a Problem with HP2500CM
>
> Hello,
>
> I have a silly problem with my HP2500CM!
> It doesn't print if I filter my job with ifhp (3.3.21)!
> After two hours of work I found the following:
> If I put the (postscript) job directly to the printer it works
> but without selecting a tray or anything...
> If I put it to the filter first ifhp add some header like
> ^[%-12345X@PJL
> @PJL JOB NAME = "PID 5067" DISPLAY = "root"
> @PJL ENTER LANGUAGE = POSTSCRIPT
> ^D%!
> <</PostRenderingEnhance true /PostRenderingEnhanceDetails <<
> /PrintQuality 3 /Type 11 >> >> setpagedevice
> <</MediaType (Tran)>> setpagedevice
> %!PS-Adobe-2.0
> ...
>
> The printer receives the file and it seems that it will be printed
> but after some seconds the READY message reappear and thats all!
>
> Next I catched the file and made some changes. The result is:
> after removing the ^D (CTRL-D) above the file will be printed with
> the correct tray selected...
>
> The funny thing is I can swear that it works fine the last months
> without this problem :-)
>
> My question is: Ist there any switch to remove this CTRL-D
> remove_ctrl=D
> doesn't work...
>
> Any help suggested with thanks
>
> Thomas
>
> --
>
> ____________________________________________________________________
> Dipl.-Ing. Thomas Emmel
>
> TU Darmstadt: Inst. f. Mechanik (FB6) AG IV
> Hochschulstr. 1, 64289 Darmstadt
> Tel.: +49 (6151) 16 49 66, FAX: +49 (6151) 16 30 18
> e-mail: [EMAIL PROTECTED]
> www : http://coulomb.mechanik.tu-darmstadt.de/user/emmel
> ____________________________________________________________________
I must warn you that 'if it works fine the last months without this
problem' it is more than likely a problem with the PostScript
that is being sent.
Patrick
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
