> From [EMAIL PROTECTED] Mon Oct 23 11:47:20 2000
> Date: Mon, 23 Oct 2000 10:05:36 -0700
> From: Steve Sizemore <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: LPRng: HP 4500 DN "Warming up"
>
> Hi. I'm using LPRng-3.6.25 and ifhp-3.4.1 under FreeBSD-4-stable, with
> a Color Laserjet 4500 DN (HP).
>
> Using a printcap similar to the one previously recommended by Patrick
>
> shaggy
> |Shaggy|rm=HSE-1285;FEC|HP Color LaserJet 4500DN
> :server
> :ifhp=model=hp4500
> :sd=/var/spool/lpd/%P
> :rw:sh:mx#0
> :lp=%P%9100
> :lf=errs:af=acct:ps=status
> :fx=flpv
> :filter=/usr/local/libexec/filters/ifhp
> :mc=0
>
> everything works well, except for the first job of the day. The
> printer goes into power saving mode overnight, and it takes a long
> time to warm up. While it's warming up, it sends the correct status
> code, but ifhp (or is it lpd?) continually retries the job, resulting
> in (usually) three copies being printed. After that, the system works
> correctly, until the printer goes back into power saving mode.
>
> Turning off status
> :ifhp=model=hp4500,status@
> does fix this behavior, but that seems heavy handed. I suspect that
> there is a specific timeout that could be tweeked. Am I right? Anyone
> know what that is, and where to set it?
>
> Thanks.
> Steve
> --
:send_job_rw_timeout=6000
This should allow 10 minutes for warmup and printing,
if this is not enough make it larger.
If this does not fix it, then do:
lpq -L and send the status to me.
Patrick
> ----------------------------------------------#-----#--#####---------------
> # # # #
> Steve Sizemore # # #
> Dept. of Cellular and Molecular Pharmacology # # #
> Box 0450, Room HSE-1285 # # #
> University of California Medical Center # # # #
> 513 Parnassus Avenue ##### ##### ##### #######
> San Francisco CA 94143-0450 # # #
> # #
> [EMAIL PROTECTED] ##### #####
> (415) 476-6987 FAX: (415) 476-6515 # #
> # # #
> -------------------------------------------------------------#####--#------
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
