Hi,
I'm using LPRng-3.7.4 for Load Balancing.
There is a local server Queue, but the chooser
may also select a remote printer "CF900@printer3".
The chooser selects the remote printer until there
are three jobs in the remote queue. The chooser
selects nothing until the remote queue has less than
2 Jobs. The remote printer runs lprng-3.6.14.
My problem is that 50-60 percent of the jobs are
not removed from the Load Balancing Queue, but they
are printed. When lpd is restarted or when an incoming
job activates a new server the jobs will be printed
a second time, and again 50-60 percent will remain in
the Queue.
My Test-setup:
The chooser selects a remote printer or
the CF900printernull, which sends the jobs to /dev/null
If the chooser selects CF900printernull everything is Ok,
but if it selects CF900@printer3 some printed Jobs remain in the
Queue:
CF900|CF:cm=Load Balancing Queue CF900:
:minfree=20000:
:chooser=/var/spool/lpd/support/chooser:
:mc=1000:
:sd=/var/spool/lpd/%P:
:la@:mx#0
:sv=CF900printernull:
CF900printernull:
:lp=/dev/null
:sd=/var/spool/lpd/%P:
:mc=1000:
:la@:mx#0:
:ss=CF900:
Jochen
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
