Joel, Thanks for your reply. But here is the problem: Here is my smb.conf file. If I put the printer in the smb.conf file and create the printer with the printtool, when I browse network neighborhood to install the printer, I see 2 printers.
So, do I use the windows driver, configure the printer in smb.conf and forget about the printtool? > > Two suggestions. First, make sure your smb.conf is explicit. > Here is mine. The print command is fancy but you can use a simple one. > > [lp] > comment = Raw Printer for Z53 > # max print jobs = 1 > path = /tmp > create mask = 0700 > guest ok = Yes > hosts allow = 192.168. > printable = Yes > printing = lprng > print command = echo %J %p %s >> /tmp/junkJ;\ > a="`echo '%J' | sed "s/^.*- //"`" ;\ > echo This is truncated $a >> /tmp/junkJ;\ > /usr/bin/lpr -Plp -J"$a" %s;\ > rm %s > lpq command = /usr/bin/lpq -Plp > lprm command = /usr/bin/lprm -Plp %j > lppause command = /usr/sbin/lpc hold -Plp %j > lpresume command = /usr/sbin/lpc release -Plp %j > printer name = lp > share modes = No > \ > Second, make sure lpd.perms is permissive. > Just one line: > DEFAULT ACCEPT > > is all you need if you are not too concerned about security. > Make sure you restart samba and lpd after you make these changes. > Joel > > > ----------------------------------------------------------------------------- > YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST > The address you post from MUST be your subscription address > > If you need help, send email to [EMAIL PROTECTED] (or lprng-requests > or lprng-digest-requests) with the word 'help' in the body. For the impatient, > to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] > with: | example: > subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] > unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] > > If you have major problems, send email to [EMAIL PROTECTED] with the word > LPRNGLIST in the SUBJECT line. > -----------------------------------------------------------------------------
smb.conf2
Description: Binary data
