> One of the problems I had was I didn't realize that the server and
> workstations should
> read different printcaps. Here's the printcaps if someone is interested,
> they both reside in a shared directory on the server:
OR you can use:
lp:client ... client information
lp:server ... server information
and put this in one printcap file.
You can even 'tag' the entries for a particular host
or server:
lp:oh=10.0.1.0/24 for 10.0.1 subnet (or 10.0.1.0/255.255.255.0)
lp:oh=*.engineering.com for hosts whose DNS name information contains
.engineering.com
lp:oh=*.engineering.com,10.0.2.0/24
for hosts whose DNS name information contains
.engineering.com OR on the 10.0.2 subnet.
Enjoy!
Patrick Powell Astart Technologies,
[EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D,
Network and System San Diego, CA 92123
Consulting 858-874-6543 FAX 858-279-8424
LPRng - Print Spooler (http://www.lprng.com)
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
