> From [EMAIL PROTECTED] Mon Feb 25 15:33:19 2002 > From: "Jackson Shea" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Subject: LPRng: Load Balancing Virtual queue > Date: Mon, 25 Feb 2002 14:33:04 -0800 > > We're running 3.6.26 and I observed today that in setting up a load > balancing virtual queue we were then ONLY able to print to the printers > through the load-balancing queue. When using the individual queues > directly, jobs would sit and wait until an lpc start was sent to the queue > which would then clear jobs one at a time.
> Was this done to force load balancing? Yes. > If so, is it configurable? Not in that version. > > thanks in advance. > > jackson shea > portland state university Patrick Powell Astart Technologies, [EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D, Network and System San Diego, CA 92123 Consulting 858-874-6543 FAX 858-279-8424 LPRng - Print Spooler (http://www.lprng.com) ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
