Hi, I've mentioned this problem here before and didn't get any response, so I thought I'd try again, this time with a little more info. I'm trying to do accurate pagecounting with an Optra S 2450 + ifhp 3.5.2. If I switch on pagecounting I get pagecount=0. If I use pagecount_poll I get pagecounts, but not very accurate. I've also tried using the lexmark 4039 'driver' with the setenginesync ps code. This works as long as the printer is not set duplex=on. If duplex is on the printer will hang. Could this be ifhp's fault, or is it the printer? Another thing I've noticed is that waitend=ps doesn't work. I haven't tried using waitend=ps with another printer yet, so I don't know if the problem is specific to this printer.
Best regards, Johan Bengtsson -- http://www.dd.chalmers.se/~elijah/ ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
