John Perkins wrote: > > > what's happening ? We've not changed any configuration from 2 weeks ago, but >today we got this errors > > Your printer is in a foul mood today: > > > Filter_status: error = ' limitcheck;' at 09:56:45.737 > > Filter_status: Error: limitcheck; OffendingCommand: show at 09:56:45.737 > > (These are errors from the printer's PostScript rendering engine.) > > Is this an HP LaserJet? You probably need to turn the printer off/on to clear > this one. > Thanks for your reply, in effect after the restart the HP LaserJet 8000, we can print again, but in the status we got these lines ... > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:01:30.905 ## A=<NULL> number=0 process=245 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:02:31.414 ## A=<NULL> number=0 process=351 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:03:31.940 ## A=<NULL> number=0 process=549 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:04:32.438 ## A=<NULL> number=0 process=573 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:05:32.938 ## A=<NULL> number=0 process=635 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:06:33.489 ## A=<NULL> number=0 process=694 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:07:34.551 ## A=<NULL> number=0 process=737 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:08:35.075 ## A=<NULL> number=0 process=916 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:09:35.584 ## A=<NULL> number=0 process=954 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:10:36.084 ## A=<NULL> number=0 process=1031 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:11:36.584 ## A=<NULL> number=0 process=1742 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:12:37.100 ## A=<NULL> number=0 process=1818 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:13:37.592 ## A=<NULL> number=0 process=2029 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:14:38.109 ## A=<NULL> number=0 process=2072 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:15:38.617 ## A=<NULL> number=0 process=2132 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:16:39.187 ## A=<NULL> number=0 process=2170 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:17:39.736 ## A=<NULL> number=0 process=2207 > ric2: Check_for_missing files: ric2: no permission to print at >2002-03-27-15:18:40.258 ## A=<NULL> number=0 process=2384 > waiting for subserver to exit at 2002-03-27-15:18:48.726 ## A=<NULL> number=0 >process=2391 > subserver pid 2395 starting at 2002-03-27-15:18:48.818 ## A=sproston@planet+328 >number=328 process=2395 > accounting at start at 2002-03-27-15:18:48.819 ## A=sproston@planet+328 number=328 >process=2395 > opening device 'jet2%9100' at 2002-03-27-15:18:48.831 ## A=sproston@planet+328 >number=328 process=2395
We've tried every trick to reset lpd, but every minute (if not printing...) we get this error. Note that we can print every job without problems, maybe is a cosmetic only error, but how we could clean it ? Thanks. -- Dott. Sergio Rabellino Technical Staff Department of Computer Science University of Torino (Italy) Member of the Internet Society http://www.di.unito.it/~rabser Tel. +39-0116706701 Fax. +39-011751603 ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
