Would you consider setting up a samba server to share your printers? There are numerous ways to manipulate access to a shared resource with samba. lpd.perms is very hard for me to understand.
Joel On Thu, Dec 19, 2002 at 04:33:02PM +0100, Thies Meincke wrote: > Hi, > > maybe the DEFAULT REJECT should be at the beginning, before > you allow printing for certain printers, however I have not > tested it so far. > > Regards, > > Thies Meincke > > On Thu, 19 Dec 2002 [EMAIL PROTECTED] wrote: > > > Hi all, > > > > I have seen messages on this list claiming it is possible to have > > different ACLs per printer. However, for me, some combinations work, > > while others don't. > > What I'd like to do is: > > -ACCEPT/REJECT print jobs depending on the requested printer name and > > the originating IP > > -In case of a REJECT, let the client know that it was rejected > > (preferably the same way the old LPR/LPD did this when a client wasn't > > listed in hosts.lpd) - what I don't want is the behavior that the print > > job gets accepted, then discarded. > > > > What I've tried so far: > > REJECT REMOTEIP=10.0.0.2 PRINTER=pr1 > > ACCEPT REMOTEIP=10.0.0.2 PRINTER=pr2 > > DEFAULT REJECT > > This denies printing from 10.0.0.2 to pr1, however, it does not tell the > > client about it, it just discards the job after it has arrived. > > > > > > REJECT SERVICE=X PRINTER=pr1 REMOTEIP=10.0.0.2 > > ACCEPT SERVICE=X PRINTER=pr2 REMOTEIP=10.0.0.2 > > DEFAULT REJECT > > This denies printing (or rather: connecting) to 10.0.0.2, regardless of > > the selected printer. Not quite the result I expected or needed. > > > > Is there anyone who could shed some light on this issue, and who could > > tell me what I can do to solve the problem? > > > > Kind Regards, > > Stefan > > > > ----------------------------------------------------------------------------- > > YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST > > The address you post from MUST be your subscription address > > > > If you need help, send email to [EMAIL PROTECTED] (or lprng-requests > > or lprng-digest-requests) with the word 'help' in the body. For the impatient, > > to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] > > with: | example: > > subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] > > unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] > > > > If you have major problems, send email to [EMAIL PROTECTED] with the word > > LPRNGLIST in the SUBJECT line. > > ----------------------------------------------------------------------------- > > > > +----------------------------+-------------------------------------------+ > | Thies Meincke | Tel. : 040/42838-6355 (BN: 0.42838-6355) | > | Universitaet Hamburg | Fax : 040/42838-6270 (BN: 0.42838-6270) | > | Regionales Rechenzentrum | E-mail: [EMAIL PROTECTED] | > | Schlueterstr. 70 | URL : http://www.rrz.uni-hamburg.de/ | > | 20146 Hamburg | RRZ/Personal/TMeincke.html | > +----------------------------+-------------------------------------------+ > > > ----------------------------------------------------------------------------- > YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST > The address you post from MUST be your subscription address > > If you need help, send email to [EMAIL PROTECTED] (or lprng-requests > or lprng-digest-requests) with the word 'help' in the body. For the impatient, > to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] > with: | example: > subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] > unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] > > If you have major problems, send email to [EMAIL PROTECTED] with the word > LPRNGLIST in the SUBJECT line. > ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
